Bath driveways - get a competitive quote for your new driveway

Get a free, competitive quote for your drive, whatever its size or surface. Covering the whole of Bath and the surrounding villages, from Larkhall to Peasedown St John, with a fast turnaround on quotes.

  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ Fast turnaround
  • ✓ All BA postcodes covered
Georgian Bath stone townhouse with a newly laid golden gravel driveway

Driveway services in Bath

Free, competitive quotes for block paving, resin bound, tarmac, gravel and imprinted concrete driveways across Bath. Itemised quotes with sub-base and drainage specified.

How it works

  1. Tell us about your drive. Two minutes in the quote form: the surface you want, rough size, your postcode.
  2. Get your free quote. Your job is priced properly and competitively, with a fast turnaround.
  3. You decide. Talk the quote through, ask questions, take your time. No charge, no pressure.

What does a new driveway cost in Bath?

A replacement driveway in Bath typically costs £2,500 to £6,500 for a standard two-car drive (45 to 55m²), material dependent. Gravel starts around £30/m², tarmac from £45/m², block paving and resin bound from £70/m², and pattern imprinted concrete from £85/m², supplied and laid including excavation and sub-base.

Bath prices run a touch above the national average, reflecting the city's labour market and the access challenges of its older streets. Ground conditions, drainage and whether the job needs a dropped kerb all move the final figure, which is why a proper quote always follows a site visit.

Typical Bath driveway prices, supplied and laid (2026)
MaterialPrice per m²Typical 2-car driveLifespan
Gravel£30 to £65£1,500 to £3,200Indefinite (top-ups)
Tarmac£45 to £85£2,200 to £4,50015 to 25 years
Block paving£70 to £120£3,400 to £6,00020 to 30 years
Resin bound£70 to £120£3,400 to £6,00015 to 25 years
Pattern imprinted concrete£85 to £140£4,000 to £7,00020 to 30 years

The full breakdown, including dropped kerbs and drainage, is in our Bath driveway cost guide.

Driveways in a World Heritage city

Bath is not a typical city to pave in. Much of the centre sits in conservation areas, and the city's honey-coloured limestone sets a visual standard that a badly chosen surface can clash with badly. On period properties around Bathwick, Widcombe and Larkhall, the right choice is usually a surface with a traditional look: gravel, sett-style block paving, or a muted resin blend that sits comfortably next to Bath stone.

Front-garden paving rules apply here as everywhere: more than 5m² of non-permeable surface needs planning permission unless water drains to a lawn or border, and in conservation areas Bath & North East Somerset Council can take a closer interest in changes visible from the street. Our planning permission guide explains the rules and the council's process in plain English.

Slopes, steps and tight access

Bath's hills are the other local factor. Drives on sloping plots in Combe Down, Lansdown and Weston need careful falls and often a channel drain at the garage line to keep surface water out of the house. A good quote specifies all of this: excavation depth, sub-base thickness, drainage and edging, not just a square-metre rate.

What to expect from any quote

Whoever you use, four things are worth insisting on:

Which material suits a Bath property?

As a broad rule across the city: Georgian and Victorian terraces in Bathwick, Widcombe and Oldfield Park suit gravel or sett-look block paving in soft, stone-friendly tones; 1930s semis in Weston, Newbridge and Twerton take charcoal or brindle block paving well; newer estates at Peasedown St John and Keynsham often lean towards resin bound for a crisp modern finish; and period cottages in the villages towards Bathampton and Saltford suit gravel or traditional tarmac with a stone sett edge. Our materials comparison guide goes deeper, or read more about how the service works.

Get a competitive quote for your Bath driveway

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote Call 07426 793938
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All BA postcodes covered

Where we cover

Coverage runs across the BA1 and BA2 postcodes, from Larkhall and Bathwick in the city out through Combe Down, Weston and Twerton to Keynsham, Saltford and Peasedown St John.

Full details on the areas we cover page.

Frequently asked questions

How much does a new driveway cost in Bath?

Most Bath driveway replacements cost £2,500 to £6,500 for a typical two-car drive. Gravel is cheapest (from ~£30/m²), tarmac mid-range (£45 to £85/m²), and block paving, resin and imprinted concrete sit at £70 to £140/m² supplied and laid.

Do I need planning permission for a driveway in Bath?

Only if you are paving more than 5m² of front garden with a non-permeable surface without drainage to a lawn or border. Permeable materials such as resin bound and permeable block paving avoid the rule. A dropped kerb always needs council approval, and conservation areas add extra scrutiny.

How long does a driveway installation take?

A typical two-car drive takes 2 to 4 days: excavation and sub-base first, then the surface. Resin and tarmac are usually quickest; intricate block paving patterns take longer.

How quickly will I get a quote?

Fast. The quote form takes about two minutes and your enquiry is priced promptly after that. The quote itself is free.

Is the quote really free?

Yes. You describe the job in the form, professionals quote for it, and you decide in your own time. No charge and no pressure.

Driveway guides for Bath homeowners

Get a competitive quote for your Bath driveway

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote Call 07426 793938
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All BA postcodes covered